行业动态

Structure and working principle of dry filter

Figure 1 is a structural diagram of a drying filter. The outer shell is formed by closing with a copper tube, and there are two types of inlet and outlet interfaces at both ends: same diameter and different diameter. The inlet end is a coarse metal mesh, and the outlet end is a fine metal mesh, which can effectively filter impurities. Molecular sieves with excellent moisture absorption properties are used as desiccants to absorb moisture from the refrigerant, ensuring smooth capillary flow and normal operation of the refrigeration system. When the desiccant fails due to excessive water absorption, it should be replaced in a timely manner.

Another type of filter is shown in Figure 2. It is also formed by rolling process like a dry filter, but only equipped with a metal mesh and no desiccant. It is installed on the relevant components or pipelines at the front end of the capillary tube in the refrigeration system, or at the inlet and outlet of the electronic expansion valve, to collect solid impurities in the refrigeration system and lubricating oil, prevent blockage of the system, capillary tube, and expansion valve, and ensure smooth pipeline system.

返回上一步: 打印此页

上一个：Introduction to Molecular Sieve
下一个：Application scope of molecular sieve desiccant